FULLSTACK INDUSTRIAL IOT • HARDWARE TO CLOUD & AI

Fullstack Industrial IoT Developer:
Custom Hardware, Firmware RTOS, Cloud SCADA & Edge AI

End-to-end engineering across the complete industrial IoT lifecycle with zero vendor handoff friction: from KiCad 4-layer PCB design, deterministic Modern C++20 / FreeRTOS firmware, isolated fieldbuses, TLS 1.3 telemetry, modern web SCADA dashboards, to NVIDIA Jetson Edge AI inference.

100%
End-to-End Delivery (Zero Hand-off Risk)
99.98%
Field Telemetry Uptime Record
<15µA
Ultra-Low Standby Current
0% Loss
Guaranteed Offline Flash Buffer

Why Most Industrial IoT Deployments Fail With Fragmented Vendors

Fragmenting hardware PCB design, firmware programming, cloud databases, and edge analytics across separate vendors creates costly finger-pointing and deployment delays.

✕

Traditional Fragmented Vendor Model

  • 1. Vendor PCB: Mendesain board tanpa memahami kebutuhan stack memory FreeRTOS atau noise filter bus RS485 saat relay motor aktif.
  • 2. Developer Firmware: Menulis kode prototype Arduino tanpa mekanisme fail-safe Store & Forward, menyebabkan data hilang saat jaringan seluler padam.
  • 3. Agensi Web Dashboard: Menggunakan HTTP polling berat yang membebani kuota SIM card dan tidak mengerti bitwise parsing format Modbus.
  • 4. Tim AI / Data Science: Mengembangkan model Python berat yang tidak bisa di-deploy di edge hardware dan memicu throttling suhu.
✓

Fullstack IIoT Specialist by Usman AR

  • 1. Desain Hardware Kokoh: Isolasi optocoupler 2.5kV, TVS surge protection, dan routing 4-layer dengan impedance matching untuk kebal noise elektromagnetik motor.
  • 2. Firmware C++20 Deterministik: FreeRTOS multitasking dengan Store & Forward SPI Flash lokal, menjamin zero packet loss meski sinyal 4G padam berhari-hari.
  • 3. Telemetri Real-Time Ringan: MQTT TLS 1.3 Sparkplug B dengan kompresi data hemat bandwidth dan SCADA web streaming via WebSockets.
  • 4. Edge AI Teroptimasi: TensorRT FP16/INT8 pada NVIDIA Jetson, menghasilkan inferensi cepat di tempat dengan proteksi interlock lokal <20ms.

The 4 Core Layers of Fullstack Industrial IoT

A unified engineering stack bridging physical silicon traces, real-time operating systems, distributed telemetry clouds, and quantized edge neural networks.

LAYER 1: HARDWARE

Industrial Hardware & PCB Design

Custom 2 to 4-layer PCB schematics and routing in KiCad 8.0 / Altium with controlled impedance. Engineered with 2.5kV galvanic isolation, TVS transient suppression, wide-input 9-36V DC-DC buck, and battery solar BMS.

KiCad 8.0 2.5kV Isolation Wide DC 9-36V DFM / SMT Ready
LAYER 2: FIRMWARE

RTOS Firmware & Field Protocols

Deterministic Modern C++20 and FreeRTOS multitasking firmware on ESP32-S3, STM32, and Nordic nRF52. Robust driver architecture for Modbus RTU/TCP, CAN Bus, 4G LTE-M, LoRaWAN, and local non-volatile ring buffers.

FreeRTOS / ESP-IDF Modbus RTU/TCP CAN Bus Store & Forward
LAYER 3: CLOUD & SCADA

Cloud Telemetry & Web SCADA

Scalable MQTT brokers (EMQX / Mosquitto) with TLS 1.3 mutual auth, TimescaleDB time-series storage, and high-performance web SCADA dashboards built with React, Next.js, or ThingsBoard CE with live WebSockets.

MQTT TLS 1.3 TimescaleDB WebSockets ERP Integration
LAYER 4: EDGE AI

Edge AI & Predictive Analytics

Real-time deep learning inference on NVIDIA Jetson (Orin/Nano) with TensorRT FP16/INT8 quantization. Real-time machine vision (YOLO/OpenCV C++) and edge FFT vibration analytics for proactive industrial predictive maintenance.

NVIDIA Jetson TensorRT INT8 YOLO Vision FFT Vibration

Field-Tested Fullstack IIoT Implementations

Production-grade deployments operating 24/7 across hydrometeorology, manufacturing conveyors, and factory power grids.

HARDWARE + TELEMETRY + CLOUD

AWLR Industrial IoT Data Logger

Sistem pemantau level air dan cuaca otomatis berdaya mandiri (Solar BMS LiFePO4). Menggabungkan custom board ESP32-S3, sensor Modbus RS485 presisi, modem seluler 4G LTE SIM7600, enkripsi MQTT TLS, dan sinkronisasi ThingsBoard cloud dengan zero data loss.

Impact: 99.98% packet reliability di lokasi terpencil tanpa listrik PLN.
ESP32-S3 SIM7600 4G RS485 Modbus ThingsBoard
EDGE AI + VISION + ERP

Industrial Conveyor Computer Vision

Sistem visi komputer edge berbasis NVIDIA Jetson yang mengoperasikan model YOLOv8 terkuantisasi TensorRT INT8. Menghitung muatan pada conveyor belt berkecepatan tinggi, memverifikasi kesehatan kamera secara otonom, dan mengalirkan data via REST API ke ERP pabrik.

Impact: Menghilangkan selisih perhitungan manual dan sinkronisasi real-time RIT truck.
NVIDIA Jetson TensorRT INT8 YOLO Vision REST ERP API
HARDWARE + ISOLATION + SCADA

Galvanic Isolated Modbus Gateway

Gateway kustom dengan isolasi galvanik 2.5kV untuk membaca 32 unit power meter dan sensor PLC di pabrik manufaktur. Firmware FreeRTOS memvalidasi checksum CRC-16, mengelompokkan paket register, dan melakukan publish ke EMQX cloud broker melalui koneksi TLS 1.3 terenkripsi.

Impact: Kebal terhadap ground loop dan lonjakan induksi motor 3-fasa.
2.5kV Optocoupler FreeRTOS C++ MQTT Sparkplug B TimescaleDB

From Technical Spec to Factory Deployment

A disciplined 5-stage engineering lifecycle ensuring hardware robustness, zero-loss telemetry, and operator usability.

01. Spec & BOM

Analisis Kebutuhan

Pemilihan mikrokontroler, analisis sensor, kalkulasi anggaran daya, dan optimasi komponen BOM siap produksi.

02. PCB Design

Skematik & Layout

Desain KiCad 8.0 dengan isolasi medan industri, routing impedansi terkontrol, dan fabrikasi prototipe SMT.

03. Firmware RTOS

Firmware & Driver

Pengembangan C++20 / FreeRTOS, driver Modbus/CAN, mekanisme Store & Forward, dan uji Hardware-in-the-Loop.

04. Cloud & AI

Dashboard & AI

Setup broker MQTT TLS 1.3, database TimescaleDB, UI SCADA real-time, dan deployment model Edge AI Jetson.

05. Commissioning

Uji Lapangan & Handover

Commissioning perangkat di lapangan, kalibrasi sensor, serah terima 100% full source code, dan garansi teknis.

Frequently Asked Technical Questions

Direct insights into engineering standards, data loss prevention mechanisms, and IP ownership models.

What is the advantage of hiring a Fullstack Industrial IoT Developer over fragmented vendors? ▾
Zero vendor friction and no handoff delays. When PCB designers blame firmware engineers and web agencies struggle with low-level Modbus registers, IoT projects stall. A single principal engineer owning hardware schematics, deterministic RTOS drivers, cloud ingestion, and edge AI guarantees seamless end-to-end delivery with 100% IP ownership.
How does the telemetry architecture guarantee zero data loss during cellular/network outages? ▾
Controllers utilize non-volatile SPI Flash or Industrial MicroSD ring buffers. When network acknowledgment times out, sensor readings are cached with high-precision RTC timestamps. Once connectivity is restored, data is synced in FIFO order while maintaining live real-time streams.
How is Edge AI integrated within this Industrial IoT architecture? ▾
Edge AI runs locally on platforms like NVIDIA Jetson (Orin/Nano) or NPU-capable MCUs. Models (YOLO for machine vision or FFT anomaly detection for motor vibration) are quantized with TensorRT FP16/INT8 to execute inference on-device, triggering immediate relays or PLC interlocks within milliseconds without cloud dependency.
Do clients receive 100% Intellectual Property (IP) ownership of hardware schematics and source code? ▾
Yes, absolutely. Clients receive complete KiCad project files (schematics, Gerbers, CPL/BOM), full firmware source repositories (C++ / ESP-IDF / STM32Cube), cloud dashboard source code, and trained AI model weights with zero vendor lock-in or recurring IP royalties.
What are the engagement models for Fullstack IIoT projects? ▾
Flexible engagement models: Milestone-based Turnkey Projects or Dedicated Monthly B2B Contractor roles. All schematic design, firmware bring-up, lab HIL testing, and cloud integration are handled remotely. Onsite commissioning and field calibration are available across Indonesia, with remote staging tunnels for international deployments.
AVAILABLE FOR B2B CONTRACT & CONSULTING

Initiate Your Fullstack IIoT Project

Connect directly to evaluate your hardware requirements, sensor interfaces, firmware safety constraints, and cloud dashboard architectures.

Direct Engineering Channels

Email Resmi
usmanar.tsm@gmail.com
WhatsApp Langsung
+628111702054
Waktu Respons
Kurang dari 4 jam kerja (GMT+7)
Chat on WhatsApp

Submit Project Inquiry